If you are sourcing cheek plates for a Metso C3054 jaw crusher, keep 585352, 585353 and 585354 as separate references. The first two identify upper cheek plates; the third identifies a lower cheek plate. The shared machine model is a starting point for an enquiry, not proof that the parts can replace one another.
This guide helps a buyer prepare a clear request, compare the offered scope and resolve identification questions before ordering.
C3054 cheek plate reference guide
- 585352 — upper cheek plate: retain this exact number and confirm the required installed position.
- 585353 — upper cheek plate: a separate upper-plate reference. Do not substitute it for 585352 without checking the applicable parts list and geometry.
- 585354 — lower cheek plate: list it separately from the upper plates when requesting a quotation.
These references are identification aids, not a universal bill of materials for every C3054 configuration. Confirm applicability against the individual machine and its current parts documentation. Specify the quantity needed for each reference rather than asking for an undefined “complete set”.
Cheek plates and jaw plates are different order items
The fixed and moving jaw plates form the opposing crushing surfaces. Cheek plates are the side liners of the chamber. A request for “C3054 liners” can therefore leave the supplier unsure whether you need jaw plates, side liners or both.
Write the component name alongside its reference number. If a shutdown requires several components, give each one a separate enquiry line. Fasteners and other associated parts should also be listed separately; a quotation for a cheek plate should not be assumed to include a mounting kit.
What to check when a marking is missing
Start with the machine model and serial number, then compare the relevant parts-list entry with the installed component. Where identification remains uncertain, send a clear overall photograph and close-ups of the plate outline, mounting holes and any legible markings. Show the installed position if you already have a suitable maintenance photograph.
A detached plate photographed from an unspecified direction can make a “left” or “right” description ambiguous. Label the viewing direction and the location you mean. Do not assign a side solely from an online thumbnail or turn a visual resemblance into a confirmed replacement relationship.
If you have an approved drawing, include its reference and revision in the private enquiry. Remove unrelated customer names, pricing and order details from shared documents. Any on-machine inspection or measurement must follow the site’s isolation procedure and the applicable machine instructions.
Keep wear assessment separate from part identification
A correct reference number answers which component is being discussed; it does not establish how much service life remains. Jaw plates and cheek plates have different roles, and advice about rotating a jaw die should not automatically be applied to a side liner.
For this purchasing guide, there is no blanket replacement thickness, operating-hour interval or promised wear-life increase. Ask the maintenance team to assess condition using the instructions for the actual machine. If unusual wear prompted the enquiry, include photographs and a short description of the application so that identification and operating concerns can be discussed separately.
A quotation request you can copy
- Machine: C3054; serial number supplied privately.
- Required reference: 585352, 585353 or 585354, with a separate line for each.
- Quantity: number of individual pieces per reference.
- Position: upper or lower, with viewing direction or an annotated photograph where needed.
- Supporting information: existing part marking, approved drawing revision or relevant photographs.
- Supply scope: plate only, or separately identified associated components.
- Delivery: destination and requested arrival date.
- Requirements: any specified material or inspection documentation to be confirmed in the offer.
A requested delivery date is a requirement to discuss, not a confirmed dispatch commitment. Before accepting an offer, check that its reference, quantity and included components match your enquiry, and that outstanding identification questions have been resolved.
Request C3054 cheek plates from GUBT
Use the linked product pages to review the individual references, or send your parts enquiry to Chengdu GUBT Industry Co., Ltd. If the number is uncertain, say so and provide the available identification information. You can also browse our jaw crusher liners and jaw crusher spare parts.
GUBT is an independent aftermarket supplier. Metso and other brand names belong to their respective owners. Model names and reference numbers are used for identification and do not imply OEM affiliation or approval.
